Bring back the deep, wet-look gloss — and protect it.
Our two-stage compound and premium marine wax service removes oxidation, water spots, and light scratches, then seals your gelcoat with a hydrophobic wax that repels salt, UV, and grime.
What this service is really about.
South Florida sun, salt spray, and hard water leave gelcoat chalky, dull, and vulnerable. A proper compound-and-wax service does two things at once: it corrects the paint or gelcoat surface, and it protects it. We machine-compound with marine-grade abrasives to level oxidation and micro-scratches, refine the finish, and lay down a premium carnauba/polymer hybrid wax that beads water for months.
Every boat is different — 20-year-old chalky fiberglass needs more cuts than a 2-year-old hull. We assess your gelcoat's condition on site and dial in the right combination of compound, polish, and wax so you get maximum clarity without unnecessary abrasion.
Real results — from a real crew.
Mirror-Deep Gloss
Multi-stage machine compounding removes oxidation and swirls for a true wet-look finish.
UV & Salt Protection
Premium marine wax bonds to gelcoat and shields against South Florida sun and salt spray.
Hydrophobic Beading
Water and grime slide off, so the boat stays cleaner longer between washes.
Done At Your Dock
Fully mobile — we bring power, water, and equipment to your slip or storage yard.
Every visit, done right.
- Full exterior pre-wash and decontamination
- Two-stage machine compound (cut + polish)
- Premium marine-grade carnauba/polymer wax
- Metal polish on rails, cleats, and hardware
- Streak-free window and gelcoat wipe-down
- Final walk-through and care recommendations
Four clean steps.
- 1InspectAssess oxidation level, hardness, and previous coatings on site.
- 2Wash & DeconFoam wash, iron remover, and clay to remove embedded contaminants.
- 3CompoundMachine cut with marine abrasives to remove oxidation and defects.
- 4Polish & WaxRefine gloss and seal with a premium marine wax that lasts months.
Common questions.
How long does a compound and wax last?
In South Florida sun and salt, expect 3–6 months of hydrophobic protection depending on use, storage, and exposure. Covered slips extend that window.
Will compounding damage my gelcoat?
No — we use marine-specific compounds and dual-action polishers, removing only the minimum needed to correct oxidation. Your gelcoat stays healthy for many future cycles.
Can this fix heavy chalking or is ceramic better?
For heavily oxidized gelcoat, a compound + wax is usually the right first step. If you want multi-year protection afterward, we also offer ceramic coatings.
Ready to book compound & wax?
Tell us about your boat and location — we'll reply within the hour, 7 days a week.
Other services we offer.
Teak Cleaning & Restoration
Two-part teak cleaning, brightening, and sealing to bring gray, weathered decks back to warm honey tones.
Wet Sand & Buff
Precision wet sanding and multi-step machine buffing to remove heavy oxidation, deep scratches, and hard water spots.
Bottom Painting & Repaint
Complete antifouling bottom paint application and repaints — proper prep, quality paints, and clean edges every time.